Electronic Programmer - M-system BPRF 960 Mode D'emploi

5 - ELECTRONIC PROGRAMMER

If you use the oven for none auto-
matic or semi-automatic cooking,
ensure programmer is set to man-
ual position by pushing
The electronic programmer performs the
following functions:
– 24 hours clock with illuminated display
– Timer (up to 23 hours and 59 minutes)
– Program for automatic oven cooking
– Program for semi-automatic oven
cooking.
Description of the buttons:
Timer
Cooking time
End of cooking time
Manual position and cancellation of
the set cooking program
Advance the time for of all pro-
grams
Decrease the program time and
changing the frequency of the audi-
ble signal.
A
U
T
O
Fig. 5.1
Description of the illuminated
symbols:
AUTO - flashing - Programmer in auto-
button.
AUTO - always lit - Programmer in auto-
Note:
Select a function by the respective but-
ton and, in 5 seconds, set the required
time with the
hand" operation).
A power cut makes the clock go to zero
and cancels the set programs.
Fig. 5.2
matic position but not pro-
grammed
matic position with program set.
Automatic cooking taking place
Timer in operation
and AUTO - flashing - Program
error.
(The time of day lies between the
calculated cooking start and end
time).
/ buttons ("one-
89