Subwoofer; Satellite Loudspeakers - Conrad CRUNCH Fat Boy Notice D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The boot or the free space under the seats is a good place for installation. Make sure that the car amplifier always
remains so accessible that it can still be connected to the electrical system.
A favourite place of installation is the dividing wall between the boot and the passenger seat. Install the
device in such a manner that the cooling ribs of the housing are in a vertical position. This ensures better
air circulation around the housing.
Mark the holes for the screws at the place of installation. Use the device itself as a model for this.
Drill the holes for the fastening screws.
Tighten the amplifier with suitable screws.
b) Subwoofer
Attach the subwoofer with straps or similar fixtures. This fastening must be also able to bear the load of the
subwoofer in case of an accident.
The boot is a suitable place for installation.
c) Satellite loudspeakers
Look for a suitable position for mounting the satellite loudspeaker.
Make sure that the room necessary behind the mounting area is sufficient for the required depth of installation.
For installation in the door, take into consideration the room which the wound down window requires.
The mounting area must be stable enough to enable secure attachment. It can possibly be strengthened by a
wooden board or similar.
After you have set the place for mounting the loudspeakers, cut out the installation openings for the loudspeakers.
Mount the loudspeakers in accordance with the following illustration:
29

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

379888

Table des Matières