Rear Panel; Front Panel - Televes TR100 Manuel D'installation

User manual
GB
4.1.2 - BASIC UNIT (PROCESSOR)
It converts either the RF or the IF input signal to any other RF output channel.

REAR PANEL

C1
C2
C3
C5
C4

FRONT PANEL

1
2
3
4
5
6
7
8
9
• (4) and (9) allow input/output channel selection just by inputing the video carrier frequency, from top to bottom.
• AUTO/MAN (6) switch allows the following operations:
AUTO: It maintains the output level for a constant value regardless input signal variations.
MAN:
• AGC (5) potenciometer adjusts the output level when AUTO mode is set
Connectors layout:
C1 RF output
C2 IF input
C3 IF output
C5 RF input
C4 Powering socket
In case of using RF input interconnect C2 and C3.
C4 powering socket features a 6 pin connector to be connected to the PSU and a
4 pin connector to be connected to the 2W amplifier module.
The output power of this module can be increased from 1w to 2 w by connecting
an amplifier to the output connector C1.
(1) Output level test points
(2) Reflected power indicator
(3) Emission
(4) Input channel selection rotary switches
(5) AGC potenciometer
(6) AUTO/MAN switch
(7) CMG potenciometer
(8) Reset button
(9) Output channel selection rotary switches
It works as a fixed gain converter and it is used for adjustment purposes or whenever
the input signal remains constant.
29
1 - 2 W. Micro - Relay TV transmitter