Festo DNCKE Série Notice D'utilisation page 22

DNCKE-.../KEC-...
Remove the packing with the exception of
S
the adhesive labels on the compressed air
ports (to prevent dirt from entering).
The packaging is intended for recycling.
(except for oiled paper which must be
disposed of ).
Make sure that the compressed air
S
supply fulfils the following conditions:
– correctly prepared
– filtered
– preferably non-lubricated.
If non-lubricated compressed air is used
for the complete service life of the prod-
uct, the service life lubrication of the
components will not be impaired.
Slowly pressurize the complete system.
S
Movements of the actuators will then
always be controlled even in unexpected
situations.
Use the product in its original state. Un-
S
authorized modification is not permitted.
22
Fig. 6
Fig. 7
Fig. 8
Festo DNCKE-.../KEC-... 0204NH English