6.4. Internal rechargeable battery
As soon as the party speaker is connected to a power outlet, the built-in
rechargeable battery begins charging automatically.
When the party speaker is on and connected to a power outlet, you can press the
button to see the current charge level of the battery in the device display.
The current charge level is displayed in four levels:
The charging bar corresponding to the charge level flashes during charging (see
Fig.). When the battery is fully charged, all four charging bars light up constantly.
If only one charging bar is displayed, you should connect the party speaker
promptly to a power outlet in order to be able to continue operating the device.
6.5. Switching the device on/off
Press and hold the
speaker.
ON appears in the device display.
The device starts in the most recently selected operating mode.
Press and hold the
device into standby mode.
OFF appears in the device display.
In standby mode, the battery is charged until it is fully charged. The
party speaker will continue to consume a small amount of power.
Unplug the mains plug to switch off the device completely.
The party speaker automatically switches to standby mode if no
operation or audio playback occurs within 15 minutes.
Press and hold the
switch the device on again from standby mode.
46
25 %
50 %
75 %
button for approximately 3 seconds to switch on the party
button again for approximately 3 seconds to switch the
button for approximately 3 seconds to
100 %