Description Of Your Appliance - Brandt BFD4520SS Guide D'installation Et D'utilisation

EN 1 / INSTALLATION

DESCRIPTION OF YOUR APPLIANCE

(depending on the model)
E
E
A A
C
C
Thermostat
A
Door shelves
B
C Vegetable compartment
Bottle shelf
D
Freezer
E
D
D
compartment
IREVERSING THE DIRECTION THE DOORS
OPEN
You can alter the direction in which the doors open if you wish:
The appliance must always be disconnected from the power
supply when changing the direction the doors open.
• Tilt the appliance slightly backwards and wedge it in this position.
•Unscrew the [pin from the lower hinge and then remove the door
from the refrigerator section.
•Take off the lower hinge by removing the 4 screws.
Fit it on the opposite side.
•Unscrew the middle hinge and remove the freezer door.
•Remove the upper hinge and fit it on the opposite side
•Swap over the hole covers and the plastic hinge pin guides on the
top of both doors.
B
B
•Fit and hold the freezer door on its hinge pin, insert the middle
hinge into the lower part of the door and screw it in place.
•Insert the refrigerator door between the middle hinge and the bot-
tom hinge and then close it.
•Refit the lower hinge and screw it firmly in place.
•If your appliance is fitted with a vertical handle, remember to move
it to the opposite side.
10