Brandt BFD4520SS Guide D'installation Et D'utilisation page 28

z Do not store any
explosive substances, such
as aerosols containing
inflammable propellant gases,
inside the appliance.
When positioning the
z
appliance, ensure the supply
cord is not trapped or damaged.
Do not locate multiple
z
portable socket-outlets or
portable power suppliers at the
rear of the appliance.
z Never expose the
appliance to a naked flame.
z Switch off and disconnect
the appliance before cleaning
or moving it.
z For models fitted with a
water dispenser or an ice
compartment, only fill or
connect using a supply of
drinking water.
z If the power cable is
damaged, it should be
replaced by the manufacturer,
its after-sales service
department or a similarly
qualified person to avoid
danger.
The refrigerating and
insulating agents used in this
appliance contain
inflammable gases. Only
dispose of the appliance in
certified collection centres.
Never expose the appliance
to a naked flame.
Coolant liquid
The appliance's cooling circuit
contains isobutane coolant
(R600a), which is a more
ecological coolant gas, which
is nevertheless flammable.
When transporting and
installing the appliance, make
sure that none of the
components of the cooling
circuit are damaged.
Caution: Fire risk
If the cooling circuit is
damaged:
-Avoid naked flames and all
sources of inflammation.
-Ventilate the room in which
the appliance is installed.
It is dangerous to change the
composition of this model in
any way whatsoever.
Any damage to the power
cord may result in a short
circuit and/or electrocution.
5