Flight Controls; Speed Selector; Trim/Regulating - Reely Race Copter X-140 RTF Notice D'emploi

a) Flight controls
• The left stick (6) controls the ascent/descent and the turn on itself in both directions.
• The right stick (13) controls the forward/backward and lateral displacement in both directions. See Fig. 3.
b) Speed Selector
• The quadrocopter has 3 speeds and one fast/acrobatic mode:
• Press the speed selector (1) to switch between the different speeds.
- One beep: slow speed
- Two beeps: intermediate speed
- Three beeps: fast speed
- Continuous beep: fast/acrobatic speed mode
c) Trim/regulating
To ensure that your quadrocopter can fly straight and level, you need to trim the aircraft. This can be done either
manually or automatically.
Manual trim
The manual trim will calibrate the movement channels of the quadrocopter so that both, take off and in-flight, remain
stable. See illustration Fig. 4.
• Manual trim A buttons (7): These buttons will correct the spin on itself, where the quadrocopter turn unintentionally
over itself, press the trim A button in the opposite direction to the rotation of the quadrocopter until it stops.
• Manual trim C buttons (11): these buttons will correct involuntary forward/backward of the quadrocopter, again by
pressing trim C button in the opposite direction to the sense that moves in an involuntary way until it is corrected.
34
Fig. 3