Burg Wächter Door eGuard Mode D'emploi page 20

3. When inserting the camera wire into the socket,
ensure you match the connectors correctly.( If in­
serted the wrong way, this can damage the wires
on the camera) The excessive wire should be gently
placed into the groove at the back of the screen.
4. Hook the screen over the bracket at the top of
the holding plate and secure with one small screw
through the hole at the bottom of the screen case.
(FIG.3)
Door
(FIG. 3)
22 | English
Hang
Screw
(FIG. 4)
(FIG. 1)
(FIG. 2)
Door eGuard