Luminaires Exlin Led Pour Atmosphères Explosives - Eaton CROUSE-HINDS Série Mode D'emploi

9 Repairs / Overhaul / Modification
Repairs that affect the explosion protection, may only be carried
out by COOPER CROUSE-HINDS or a qualified electrician (Competent
person) in compliance with the applicable national rules
(IEC/EN 60079-19).
For replacement and repair only original parts from COOPER CROUSE
HINDS-/ EATON may be used.
If it is necessary to replace the LED module, it have to be replaced
with a new LED module that is assigned to the respective ExLin
luminaire type.
If the built-in qTEK driver must be replaced, have to be used the qTEK
driver assigned as standard driver for the ExLin luminaire in question
(see Technical Data).
Alternatively a qTEC driver with higher power can be used (e.g. qTEK
10 ... will be replaced by qTEK 20).
Modifications to the device or changes of its design are not permitted.
They shall be used for their intended purpose and in perfect and clean
condition.
10 Disposal/Recycling
When the apparatus is disposed of, the respective national regulations on
waste disposal will have to be observed.
In case of disposal you can obtain additional information from your Cooper
Crouse-Hinds /EATON branch.
Subject to modifications or supplement of the product range.
20
Luminaires ExLin LED pour atmosphères explosives
F