Victoria Arduino VA358 White Eagle Manuel D'instructions page 59

• Press ENTER to set the values.
• Use the ▲ ▼ keys to set both values.
• Use the ENTER key to confirm.
Once the set delivery limit or the set mainte-
nance date have been reached, the display
will visualize the message: MAINTENANCE.
To eliminate the maintenance alarm mes-
sage will be necessary to move the date
forward or increase the number of dispensed
coffee.
Once having carried out the modifications, reset
the inner counter of the cycles to make them
effective. Hold down the button
second to reset the internal counter. A message
relative to the counter zeroing will be displayed.
SETTING PASSWORD:
The password may consist of 4 numbers from 0
to 9 in any combination.
The password length may be included between
0 (password disabled or invalid, characterized
by horizontal lines) and 4 digits; therefore, even
a password of 2 digits is valid.
Fri/09/09 14:45
INSERT NEW PASSWORD
- - -
1.21 bar
• Use the ▲ ▼ keys to set the value (0 to 9).
• Use the ENTER key to confirm e and move
to editing the next value.
• Once all values set will be displayed:
CORRECT PASSWORD
1.21 bar
• Exit from the menu to activate the password
function by RESET key.
• To enter the pages inside the various menus,
a least 5
when the password is unknown, the
passe-partout password may be used. The
value of this password is 1 9 0 5.
Change of password:
To change a password set is necessary to first
confirm the password set (for safety reasons), if
the password management is enabled.
Once having entered and confirmed the pass-
word, an information page will show the result of
the comparison between the entered password
and the one previously set.
CORRECT PASSWORD
-
1.21 bar
Subsequently, the new password to be set will
be requested.
PRE-BREWING:
Fri/09/09 14:45
The digital pre-brewing can be set, that is the
machine delivers water for a time that can be
set (time ON), stops for a period that can be set
(time OFF), and then continues the delivery.
By selecting the digital pre-brewing ON, the
following parameters can be changed:
1. Pour time OFF: In the total pour time count
the pour time OFF set can be included
(ON) or excluded (OFF).
2. Pre-brewing Time ON: It sets the pour
starting time, when the coffee pad gets
wet. It changes from 0.5 to 3 seconds with
0.1 second interval.
3. Pre-brewing Time OFF: It sets the pause
time before the pouring continues. It
changes from 2 to 8 seconds with 0.1 sec-
ond interval.
Fri/09/09 14:45
59