Technical Settings; Operating Mode - Victoria Arduino VA358 White Eagle Manuel D'instructions

5.2.8

Technical settings

NOTE: Executable operation only from by qual-
ified technicians.
The regulation by unskilled technicians
or other persons may void your warranty.
With the ▲ ▼ keys select "TECHNICAL
SETTINGS" and press ENTER to access:
Fri/09/09 14:45
FAULTS HISTORY
TECHNICAL SETTINGS
►
1.21 bar
5 options will be displayed:
Fri/09/09 14:45
► INFORMATIONS
DATE/HOUR
MAINTENANCE
SETTING PASSWORD
PRE-BREWING
1.21 bar
INFORMATION:
This function serves to view the main informa-
tion about the machine and the software.
58
Fri/09/09 14:45
REL. POWER
REL. TFT
1.21 bar
While holding down the cleaning button
least 5 seconds you can enter the control unit
configuration page.
Fri/09/09 14:45

OPERATING MODE

T3
1.21 bar
You can configure the following parameters:
• Operation Mod.
• Machine groups
• Steam 1
• Steam 2
• Purge timer
• Power management
• Autoleveller
• Autoleveller sensitivity
• Hot water
• Delivery level
• Temperature calibration
• Pressure calibration
• Clock calibration
• Absolute tot. reset
• Serial connection.
DATE/HOUR:
This function serves to change the date and
time setting for the machine.
0.31
0.15
14 45
SUNDAY
10
DECEMBER
2017
at
1.21 bar
The times will start to flash on and off.
Vary the hours and the minutes by using the key
▲ ▼.
Confirm by pressing the ENTER key.
Once the hours and the minutes have been
varied press ENTER again and vary the day, the
month and the year by using the same proce-
dure as described above.
MAINTENANCE:
This function serves to set scheduled mainte-
nance.
It is possible to programme the number of deliv-
eries and the date after which the maintenance
alarm will be enabled.
The alarm is triggered when the hour counter or
date is reached.
The machine will continue to operate as normal.
DELIVERIES 30000
01
MARCH
2018
1.21 bar
Fri/09/09 14:45
Fri/09/09 14:45