Counters - Victoria Arduino VA358 White Eagle Manuel D'instructions

If the on/off button is pressed during one of the
three active standby states (0.10 bar, 0.50 bar,
0.80 bar), the machine will switch off completely.
If the button is pressed again, this will switch on
the machine.
POWER MANAGEMENT:
This function serves to control the power
absorbed by the machine while it is heating up,
in order to limit consumption.
If enabled at switch on, the use of the steam
boiler, groups and group boiler will be split. The
Power Management heating system will stop as
soon as the steam boiler steam requirement
drops to below 40% of maximum required
power.
At this point, the machine will resume working
as normal.
• Use the ▲ ▼ keys to select ACTIVE o NOT
ACTIVE and press ENTER key to confirm.
Fri/09/09 14:45
POWER MANAGEMENT
ACTIVE
1.21 bar
56
5.2.6

Counters

With the ▲ ▼ keys select "counter" and press
ENTER to access:
Fri/09/09 14:45
LANGUAGE
PROGRAM DOSES
SETPOINT
DISPLAY SETTINGS
ENERGY SAVING
COUNTERS
►
1.21 bar
A screen will open to view the counters:
Fri/09/09 14:45
►
DELIVERY COUNT
SERVICE COUNTERS
GRAND TOTAL
CLEANING COUNTER
1.21 bar
Select the counter you want using the ▲ ▼
keys and press ENTER to access.
DELIVERY COUNT:
• The display will read:
Fri/09/09 14:45
DELIVERY COUNT
SELECT
1.21 bar
• By pressing one of the flashing buttons the
counters of the group are displayed.
Fri/09/09 14:45
1CN1
2CN1
1CL1
2CL1
CONT1
PURGE 1
1.21 bar
• Press the RESET button to exit of visualization.
SERVICE COUNT:
• The display shows:
Fri/09/09 14:45
WATER
1.21 bar
• Press the RESET button to exit of visualization.
4
4
11
16
121
126
151