Display Setting - Victoria Arduino VA358 White Eagle Manuel D'instructions

PRESSURE - TEMPERATURE TABLE
Bar °C
1,25 122,5
1,30 123
1,35 124
1,40 124,5
1,45 125
1,50 126
1,55 126,5
1,60 127
NOTE: The table refers to the values found
above sea level.
CUP-WARMER PROG.:
The display will read:
Fri/09/09 14:45
CUP-WARMER
SETPOINT 66°C
1.21 bar
Using the ▲ ▼ buttons to set the desired tem-
perature for the cup warmer. Press ENTER to
confirm the value.
5.2.4 Display settings
With the ▲ ▼ buttons to select "DISPLAY
SETTINGS" "and press ENTER to access:
54
°F
LANGUAGE
252,5
PROGRAM DOSES
SETPOINT
253,4
► DISPLAY SETTINGS
255,2
ENERGY SAVING
256,1
COUNTERS
257
258,8
1.21 bar
3 options will be displayed:
259,7
260,6
►
DELIVERY TIME
TEMPERATURE
LIGHT ADJUSTMENT
1.21 bar
DELIVERY TIME:
This function makes it possible to activate/deac-
tivate viewing for the pouring time of a specific
group on the screen:
DELIVERY TIME
1.21 bar
The following options are available:
• Inactive (not visible);
• Timer (vanishes after 5 sec.);
• Persistent (remains on the display until
the next coffee).
Fri/09/09 14:45
Fri/09/09 14:45
Fri/09/09 14:45
TIMED
Select the desired option with the ▲ ▼ keys
and confirm by pressing ENTER.
TEMPERATURE:
This screen serves to change the unit of meas-
ure (Celsius or Fahrenheit) for the temperature
used to control the whole interface:
Fri/09/09 14:45
TEMPERATURE
CELSIUS
1.21 bar
Select the desired option with the ▲ ▼ keys
and confirm by pressing ENTER.
LIGHT ADJUSTMENT:
From this screen you can change the brightness
of the buttons and the display:
Fri/09/09 14:45
KEYS
DISPLAY
1.21 bar
Use ▲ ▼ keys to select the sensitivity level
and press ENTER.
8
6