Vertical Ironing; Ironing Without Steam - Singer SG70 Mode D'emploi

• For extra steam press the extra steam button (10). If you want continuous steam emission,
keep the button pressed and slide the steam lock button (10) backwards.
• To modify the quantity of steam emitted while ironing, turn the temperature adjustment knob
(8). Turn the knob clockwise to increase steam emission.
• When the "no water" light turns on (5), it indicates that there is no water in the boiler and that
it needs to be refi lled.

VERTICAL IRONING

• Set the temperature adjustment knob (8) at the max position (points"...").
• Hang the item of clothing on a hanger.
• Pass the iron downwards, pressing the extra steam button (10).
Note:
1. Do not apply steam on any clothes or fabrics that are being worn by human or pets.
Temperature of steam is very high.
2. Maintain a distance of a few centimeters from delicate fabric (synthetics, silk, velvet, etc.).
Otherwise the fabric could be damaged.

IRONING WITHOUT STEAM

Plug in the supply cord (tube) into the socket. Press the on/off switch (3) but do not press
the boiler on/off (2). Choose the desired temperature by turning the temperature adjustment
knob (8). Wait for the iron temperature warning light (6) to turn off, indicating that the desired
temperature has been reached. Do not press the extra steam button (10) and steam lock button
(10) when ironing without steam.
REFILLING WITH WATER
• Turn off the on/off switch, press the extra steam button until steam is no longer discharged from
the iron. There will be no more pressure inside the boiler.
• Slowly unscrew the boiler cap. USE EXTRA CARE.
• Pour a maximum of 800ml of tap water into the boiler.
• Firmly screw the boiler cap. Turn on the on/off switch again.
WARNING! The boiler cap must not be opened while there is still pressure in the boiler.
If the boiler has been in continuous use for a long time, the boiler cap may be hot!
6
ENGLISH