Vertical Steaming - Singer SteamCraft Manuel D'instructions

Using Your SteamCraft Steam Iron
BURST OF STEAM
For extra steam to re-
move stubborn wrinkles,
simply press the Burst
of Steam Button while
steam selector knob is
turned to position
Note: It might be neces-
sary to press the Burst
of Steam Button a few
times before you can
use the function. For optimum steam quality, do not operate the Burst of Steam more
than three times in succession, waiting 2 seconds between button presses.

VERTICAL STEAMING

To remove wrinkles from delicate fabrics, garments or curtains in
the hanging position:
1. Set temperature setting to "High (
2. Hold the iron in vertical position 15-30 centimeters (6-12
inches) away from the garment.
3. Move the Steam Selector to
For Burst of Steam in vertical position:
1. Set temperature setting at "High (
2. Hold the iron in vertical position 15-30 centimeters (6-12
inches ) away from the garment.
3. Press the Burst of Steam Button.
WARNING: Do not apply steam to any clothes or fabrics that are being worn by humans
or pets. Temperature of steam is very hot and can cause burns.
SPRAY
This function can be used to remove stubborn wrinkles.
1. Fill Water Tank as described in this manual.
2. Aim the Spray Nozzle toward the wrinkled garment.
3. Press the Spray Button.
4. Iron the garment.
00:01
)" or "MAX".
LINEN
position to generate steam.
)" or "MAX".
LINEN
00:02 00:01
ENGLISH – 7