Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Topcom Deskmaster 4100
6.2
Set the area code
When you have a subscription to the caller ID
service it can be necessary in some countries to
enter your area code. When the telephone re-
ceives a caller ID it will remove the entered area
code from the incoming number.
•
Press
to enter the menu
•
Use
/
to select "
•
Press
to enter the area code settings
•
Use
/
to change
•
Press
to move to the next digit.
6.3
Set the LCD contrast
There are 8 levels of LCD contrast (0..7). Choose
the most convenient level.
•
Press
to enter the menu
•
Use
/
to select "
•
Press
to enter the LCD contrast settings
•
Use
/
to select the level
•
Press
to confirm
You can also access the LCD-contrast settings,
just by pressing the R/LCD key
6.4
Set the PBX code
When your phone is connected to a PBX system
you can enter the PBX line access code.
The line access code will be added when dialling
out a number from the caller ID list.
•
Press
to enter the menu
•
Use
/
to select "SET 4 PcodE"
•
Press
to enter the settings
•
Use
/
to change select the digit
•
Press
to move to the next digit
6.5
Select PULSE or TONE dialling
By default, the telephone is set for Tone dialling
(DTMF). Some old lines require pulse dialling.
•
Press
to enter the menu
•
Use
/
to select "
•
Press
to enter the Pulse/Tone settings
•
Use
/
to select 'toNE' or 'PULSE'
•
Press
to confirm
4
6(7 &RG(
"
6(7 /FG
"
6(7 3W
"
6.6
Set the flash time
The R/LCD-key (flash) is used for services like
"Call waiting" (if this service is provided by your
telephone company) or to transfer calls when the
telephone is connected to a PBX-system.
Depending on the country, this flash-time can be
different.
The telephone supports 4 possibilities : 100, 300,
600 and 1000 msec.
•
Press
to enter the menu
•
Use
/
to select "SET 6 FLASH"
•
Press
to enter the FLASH settings
•
Use
/
to select your flash-time
•
Press
to confirm
6.7
Ringer volume
At the back panel of the telephone you find a
switch that can be set in three positions : off, low
and high.
•
Choose the most comfortable volume setting
6.8
Anti-dialling from parallel line
You can prevent that other telephones, connected
to your line, can make a call.
When this function is activated you will be alarmed
when someone tries to make a call with another
telephone connected to your line.
•
Press and hold # for three seconds
•
"SPI oFF" appears
•
Press # again to activate "SPI on"
•
Press
to confirm
Follow the same procedure to deactivate this
function ("SPI oFF")
Topcom Deskmaster 4100
Publicité
Table des Matières
