Topcom DESKMASTER 4100 Manuel D'utilisateur page 5

7 Operation
7.1 Making a call
• Enter the telephone number
• Press to delete a wrongly entered digit
• Pick up the handset or press
hands-free call
During a call made with the handset you can
switch to hands-free by pressing
up the handset.
In case the telephone is connected to a PBX sys-
tem it might be necessary to add a pause after the
PBX access code. The phone can generate a 4
second pause time.
For example:
0 P 012345678
Press the /P key to enter a pause
The call duration timer will start in the display 6
seconds after the number was dialled.
7.2 Receiving a call
• When a call comes in, the phone will ring and
the Ringer LED will flash
• Pick up the handset or press
call hands-free
7.3 Set the volume level
During a call, you can adjust the speaker volume
in the handset or in the loudspeaker (hands-free
mode). There are 4 volume levels.
• Press the volume key
set the volume level
7.4 Mute the microphone
During a call you can deactivate the microphone
and talk freely without the caller hearing you.
• Press to activate ( "mutE" will appear in
the display)
• Press again to continue your
conversation
7.5 Music on hold
During a call you can press the
other party on hold. The other party will hear an
electronic melody.
• press the -key to put the other party on hold
Topcom Deskmaster 4100
•
7.6
The phone has two different redial keys
to make a
7.6.1 Last number redial
Press this key to redial the last number.
7.6.2 Redial list
and hanging
The phone will store the 18 latest dialled numbers
together with the call duration.
•
•
•
•
7.7
The phone can store up to 80 incoming numbers
together with the time and date of the call.
•
to take the
•
•
or use / to
7.8
In the incoming number list you can set special
numbers as VIP (Very important person).
•
•
•
-key to put the
Press the key again to continue your
conversation.
Last number redial
Press and use
your latest dialled numbers ("OUT" will
appear in the display)
Pick up the handset or press
hands-free call
Press to delete a number
Press and hold for three seconds to delete
all numbers
Caller ID
Press / to go through the incoming
numbers ("IN" will appear in the display)
Press to delete a number
Press and hold for three seconds to delete
all numbers
Missed calls will be displayed together
with "NEW"
The Missed call LED will blink to indicate
one or more missed calls
VIP numbers
When browsing the incoming number, press
/VIP to set the number as VIP
The symbol will appear in the display
Press /VIP again to deselect VIP
When a number is set as VIP you cannot
delete it from the incoming number list.
Topcom Deskmaster 4100
/P
/ to go through
to make a
5