Technical Specifications - BoomToneDJ X Moon Star Mode D'emploi

 Emissions control: the control panel should be placed outside the
locations exposed to hazardous emissions. The control of lasers in
Classes 3 and 4 should be under the control of a key control, removed
when the device is not in use and owned by a qualified person.
 Disclaimer: The use of this device is exclusively for professional
activities show and display.
 It is forbidden to allow projecting the beams to the audience and any
areas accessible by persons without appropriate eye and skin
protective items. It is forbidden to use this device for any other
purpose than that for which it is intended.
 It is forbidden to shine any laser beam to the aircrafts.
 If the laser is operated in a situation where health or property injury
may occur, operation MUST be stopped immediately!
Manufacturer and distributors are not responsible for any
damages caused by use of BoomtoneDJ lasers. User is responsible
for applying conditions of use according to regulations stipulated
in EN60825-1:2014 and all locally applicable safety laws and
regulations.
Visible and invisible laser radiation. Avoid eye and skin exposure to
direct or scattered radiation ! Class III B laser product EN 60825-1 :
2014 Directive LVD n°2006/95/CE
 Directive RoHS 2 n°2011/65/UE

Directive EMC n°2014/30/EU

2- Technical Specifications


Power supply:AC100-240V,50/60Hz

Power consumption:80W

Light source: Beam :20pcs 3W RGBWA LEDs Strobe: 24pcs 0.2w SMD
White LEDs

Laser : 532 nm/30 mW (green) laser diode, 650 nm/100 mW (red) laser diode

Life Time:50,000 hours
14