Festool Rutscher RTS 400 Q Notice D'utilisation D'origine page 11

- rubbing down stained surfaces with sanding
vlies
- rubbing down or removing excess lime paste with
sanding vlies
2 - 3
- interim paint sanding on stained surfaces
- cleaning natural wood window grooves with sand-
ing felt
1 - 2
- sanding stained edges
- sanding thermoplastic synthetics
7 Accessories
For your own safety, use only original Fes-
tool accessories and spare parts.
Festool offers the appropriate accessories, sanding
and polishing attachments for every application.
The accessory and tool order number can be found
in the Festool catalogue or on the Internet under
"www.festool.com".
8 Maintenance and care
Always remove the power supply plug from
the socket before carrying out any work on
the machine.
All maintenance and repair work which
requires the motor casing to be opened
may only be carried out by an authorised
service centre.
Customer service and repair. Only
through manufacturer or service work-
shops: Please fi nd the nearest address
at: www.festool.com/Service
Use only original Festool spare parts!
EKAT
4
Order No. at: www.festool.com/Service
5
3
2
1
The cool air openings in the motor casing must
always be kept clean and unobstructed to ensure
air circulation.
The tool is fi tted with special motor brushes with
an automatic cut-out. When the brushes become
worn the power supply is shut off automatically
and the tool comes to a standstill.
9 Disposal
Do not throw the power tool in your household
waste! Dispose of machines, accessories and
packaging at an environmentally-responsible
recycling centre. Observe the valid national regu-
lations.
EU only: European Directive 2002/96/EC stipulate
that used electric power tools must be collected
separately and disposed of at an environmentally
responsible recycling centre.
Information on REACh:
www.festool.com/reach
11