Service; Accessories; Warranty - Dustcontrol DC Tromb 400c Notice Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20

Service

With cleaning and maintenance on the machine,
the power cable should be disconnected from the
supply. Fluids should not come into contact with the
motor. When cleaning with fl uids the motor should
be covered to anoid contact.
The fi ne fi lter should be changed at least once per
year. Use only original spare parts. The microfi lter/
HEPA fi lter, should be changed every 300 running
hours. Use breathing protection during a fi lter chan-
ge. The operation should be performed in a closed
area. Used fi lters should be sealed in a plastic sack
and disposed of properly.
Check regularly that the electrical cable is not da-
maged.
The DC Tromb 400 should be performance tested
at least once per year because it may be used with
hazardous materials. Worn parts must be replaced.
Never compromise the function of the DC 3900, use
only original spare parts.

Accessories

Description
Coupling socket
Coupling socket
Hose std Ø=50 per mtr
HEPA fi lter
Fine fi lter, polyester,
with integrated fi lter cover

Warranty

The warranty period for this machine is two years
and covers manufacturers faults. The warranty is
valid under the condition that the machine is used
under normal conditions on the task for which it was
designed and is maintained properly. Normal wear
is not covered by this warranty.
For vacuum motor the typical average life of the
original brushes is 600 - 700 hours. They can then
be exchanged or complete motor/fan replaced. For
2nd brush set life is ca. 400 hours and for 3rd brush
set ca. 300 hours. After that the commutator is worn
out and the motor needs to be replaced.
Description
Part no
Plastic sack, 50 pieces
2107
Intellibag, 10 pieces/roll
2129
Fold bag longopac
2401
44016
44017
Other accessories — see Dustcontrol catalogue.
Service performed by other than Dustcontrol or its
authorized agent voids automatically the warranty.
No other warranty express or implied is applicable.
DC Tromb 400 - 13
Part no
4314
43619
432177
Part No 9480-A

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dc tromb 400aDc tromb 400lDc tromb 400 série

Table des Matières