Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2
LPG kit
2.1
Kit description
The kit allows the burners type 552T..., 566T30, 587M,
587T30 and 930T designed to work with natural gas to burn
LPG and is composed of:
Description
Reducer
Diffuser 1.3
Label
Instruction
2.2
Technical features
La potenza termica e il campo di lavoro dei bruciatori trasformati
a GPL sono uguali a quelli per funzionamento a gas naturale.
(Vedere istruzione del bruciatore).
2.3
Conversion
Disconnect the electrical supply from the burner
by means of the main system switch.
DANGER
On the combustion head of the burners, that natural gas diffuser
should be replaced with the one used for LPG, and a reducer
should be added.
Proceed as follows: (Fig. 1)
Disassemble the ignition electrode and the ionisation probe.
Replace the natural gas diffuser (stamping 2), with the dif-
fuser for use with LPG, supplied with the burner (stamping
1,3).
Remove the distributor - diffuser disc once the screws have
been removed.
Insert the reducer, reassemble the distributor - diffuser disc
and tighten the fixing screws.
Reassemble the electrode and the ionisation probe in the
position foreseen in the instructions for the natural gas.
Apply the self-adhesive label for LPG operation
near the characteristics label (Fig. 2).
WARNING
LPG kit
Quantity
1
1
1
1
Gas Family 3
Pci 24 - 34 kWh/m
21.000 - 29.300 kcal/m3
Min. pressure 13 - max. 200 mbar.
Diffuser
Distributor -
Diffuser disc
S7603
D4005
2
GB
Before starting the kit installation operations, get a
suitable lifting system ready.
Be careful as some drops of fuel may leak out dur-
ing the kit installation phase.
3
Reducer
Adhesive data plate supplied
as equipment
After carrying out maintenance, cleaning or
checking operations, reassemble the cover and
all the safety and protection devices of the burner.
Fig. 1
Fig. 2
2901512
Publicité
Table des Matières
