Technical Features - Riello 40 FS20 Manuel D'entretien

Forced draught gas burner

TECHNICAL FEATURES

Thermal output
Net heat value
Gas
(Family 2)
Pressure
Electrical supply
Motor
Capacitor
Ignition transformer
Absorbed electrical power
For gas family 3 (LPG) ask for separate kit.
COUNTRY
GAS CATEGORY
CE marking according to Gas Appliance Directive 90/396/EEC; PIN 0063AP6680.
According to directives: EMC 89/336/EEC, Low Voltage 73/23/EEC, Machines 98/37/EEC and
Efficiency 92/42/EEC.
Gas train according to EN 676.
1 – Air-damper
2 – Screws for fixing the air-damper
3 – 7 pole socket for electrical supply
and control
4 – 6 pole socket for gas train
5 – Grommet
6 – Screw for fixing the cover
7 – Lock-out lamp and reset button
NOTES
– The grommet (5) supplied with the burner, must be fitted to the same side of the gas train.
– After having installed the burner verify the access to the fixing screws of the cover.
If necessary replace them with the fixing screws (6) fig. 1 supplied as equipment.
2056
FS20
81 – 218 kW
8 – 12 kWh/m
min. 20 mbar
single phase, 230 V ± 10%
230 V / 1.4 A
5 µ F
primary 230 V / 1.8 A – secondary 8 kV / 30 mA
0.25 kW
FR GB - IE
II2Er3P II2H3P
3756931
CODE
– 69,700 – 187,500 kcal/h
3
– 7,000 – 10,340 kcal/m
– max. 35 mbar
DK - AT - GR - SE
II2H3B/P II2ELL3B/P
7
6 5
1
GB
569T30
TYPE
3
~
50Hz
DE LU
II2E3B/P
Fig. 1
4 3
D5260
NL
II2L3B/P
1
2
2