Bluetooth Led; Name; Warranty - PERFECTPRO Slim 2 Manuel De L'utilisateur

BLUETOOTH LED

Bluetooth LED configuration
Press the ON/OFF button to turn on the radio.
Press the MENU button, and then rotate the TUNING/SEEK knob until the display
shows "System".
Press the TUNING/SEEK knob; rotate the TUNING/SEEK knob until the display shows
"Bluetooth LED".
Press the TUNING/SEEK knob to enter the Bluetooth LED adjustment menu.
Rotate the TUNING/SEEK knob to select "on" in order to keep backlight always
lightened when the radio is turned on with AC power supply;
Or rotate the TUNING/SEEK knob to select "off" (by default) so that the backlight will be
lightened for about 10 seconds whenever a button is pressed with AC power supply.
Press the TUNING/SEEK knob to confirm your choice.
Note: The Bluetooth LED option "on" is only functional when the radio is in Bluetooth
mode. If the Bluetooth LED option is set to "off", this blue LED will be turned off either
mobile phone is connected (not blinking) or not connected (blinking).

NAME

This radio is supporting users to customize the radio's name. If the radio has been
renamed, the new name of the radio will be shown when the radio is turning off or
entering to standby.
1. Press the ON/OFF button to turn on the radio.
2. Press the MENU button, and then rotate the TUNING/SEEK knob until the display
shows "System".
3. Press the TUNING/SEEK knob; rotate the TUNING/SEEK knob until the display
shows "Name". Press the TUNING/SEEK knob.
4. Rotate the TUNING/SEEK knob to select the letters. The maximum length of new
name is 16 letters' long.
Press the TUNING/SEEK knob to confirm the current selection. By pressing this
5.
TUNING/SEEK knob, the cursor will be moved to next position for selection.
6. Press the P3/ or P4/ button to move the cursor to left or right cyclically.
7. Repeat step 4 to step 6 to edit the new radio name.
8. To complete editing the new radio name, you can either edit all the 16 letters or
press the MENU button.
9. When finishing editing the radio name, the LCD will display "Confirm changes"
in the first line, and display "OK" to save the changes or "Cancel" to discard the
changes.
10. To confirm the changes, rotate the TUNING/SEEK knob until "OK", and then press
the TUNING/SEEK knob to exit. After this action, the radio will save the new name.
11. To cancel the changes, rotate the TUNING/SEEK knob until "Cancel", and then
press the TUNING/SEEK knob to exit. After this action, the radio will discard the
changes and keep the current radio name as for display.
19
12. When next time the radio is turning off, the LCD will show "Welcome" in the first line
and the new name in the second line.
13. When the radio is turning off, the LCD will show "Goodbye" in the first line and the
new name in the second line.
If there were no user operating by the panel buttons for more than 20 seconds during
editing, the radio would automatically exit the rename function without saving any of the
changes.
Note: The default radio name is empty. And the new edited name will be lost and back
to default after executing factory reset in the menu.
Note: The radio is supporting maximum 16 letters as the new name of the radio.

WARRANTY

This radio has a 2 year limited warranty.
WARNING ! Warranty becomes void once the radio cabinet has been opened or
any modifications or alterations to the radio have been made !
The terms of the warranty of this radio do not cover the following:
- Damage caused by misuse, abuse, neglect, alterations, accidents or unauthorized
repair.
- Normal wear and tear.
- Batteries
GB
20