Clarion DXZ948RMP Mode D'emploi page 8

Basic Operations
Wallpaper
Touching and holding the center of the display
for 1 second or longer switches to the wallpaper
display.
1 9
0
2
3 !
@
4
5 #
6 $
7 %
8 ¥
14
DXZ948RMP
Spectrum analyzer display
Touching and holding the right of the display for
1 second or longer during the spectrum
analyzer (S/A) display switches the spectrum
analyzer display.
S/A 1, S/A 2, and S/A 3 are
S/A
displayed for 10 seconds or longer
SCAN
each.
S/A 1
S/A 1
MODE
FLDR No.
WMA
WMA
003
01 / 01 : 48
TOP
S/A 2
S/A 2
MODE
FLDR No.
WMA
WMA
003
01 / 01 : 56
TOP
S/A 3
S/A 3
MODE
FLDR No.
WMA WMA
003
02 / 00 : 04
TOP
Switching the title display
You can display disc titles and other information
that is stored to discs when playing back CDs in
the CD or CD changer modes.
1. Touch and hold the right of the display for 1
second or longer in the title display.
Each time you touch and hold the display
switches the display as follows:
CD-TEXT disc
User title (disc) CD-text title (disc)
Artist name CD-text title (track) User
title (disc)...
MP3/WMA disc
Folder File Album TAG Artist TAG
Title TAG Folder...
Notes:
• MP3 supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0.
• Tag displays give priority to V2.3 / 2.2.
• In the case of album Tags for WMA, the
information written into the extension header is
displayed.
• Only ASCII characters can be displayed in Tags.
To scroll a title
Touch on the title display while the title is
displayed.
The title scrolls to the left.
To stop scrolling
Touch on the title display.
CT (Clock Time) function
The CT allows you to receive CT data sent from
an RDS station and display the time. To display
the CT screen, touch the centre of the display.
• If CT data is not being received, "--:-- CT"
appears in the display.
Note:
• CT data is not transmitted in some countries and
by some broadcast stations. Also, in some areas,
the CT data may not display accurately.
Setting the ADF
• ADF is the abbreviation of Anti Distortion
Filter.
The adopted "Liveliness Enhancement Filter"
and "Sound Tone Compensation" functions
allow well-modulated realistic playback without
affecting the characteristics of the original sound
tone.
This unit are provided with 4 types of sound
tone effects stored in memory. Select the one
you prefer.
ADF-1 : Suitable for genuine speakers
ADF-2 : Suitable for separate speakers
ADF-3 : Suitable for co-axial speakers
USER : This setting can be adjusted by the
user to his or her individual preference.
OFF : No sound effect
• The factory default setting for "OFF".
Notes:
• As the volume changes when ADF is switched,
switch ADF with the volume and "SW VOLUME"
(sub-woofer) and "CTR VOLUME" (center
speaker) turned down as far as possible.
• On some speaker systems, sufficient effect
sometimes cannot be obtained. If this happens,
adjust the ADF parameter or the volume.
• When ADF is set to "USER", "1", "2" or "3", the
VSE function and BASS/TREB function under
EQ-SELECT are disabled.
1. Press the [SOUND] button.
2. Touch ADF.
OFF OFF OFF
POSITION P. EQ Dolby PL II
RTN
SOUND MENU
2 - ZONE ADF A - MODE
OFF
OFF
Basic Operations
3. Touch on the right of the display to
select the ADF mode.
RTN
OFF
ADF MODE
When ADF is set to "OFF", the ADF setting
is not reflected on the music source. This
ends the ADF setting. Press the [SOUND]
button to return to the original mode.
∗ Select one of USER, 1, 2, 3, or OFF.
4. To change the details of the ADF setting,
press the [A] button.
5. Touch on the adjustment item display
to select the desired item.
Each touch of switches the
adjustment item display as follows:
Adjustment item (when USER is
selected in step 3)
BASS TREBLE COMP BASS...
Adjustment item (when 1 to 3 is
selected in step 3)
LEVEL COMP LEVEL...
6. Touch on the right of the display to
adjust the item.
∗ "BASS" and "TREBLE" can be adjusted
within the range 1 to 13.
∗ "LEVEL" can be adjusted within the range
-3 to +3.
∗ Select either "ON" or "OFF" for "COMP".
7. Press the [SOUND] button to return to the
original mode.
Adjusting the Sub-woofer and
Centre Speaker
• "SW VOLUME" (sub-woofer) can be adjusted
only when "SUB-WOOFER" is set to "ON".
• "CTR VOLUME" (centre speaker) can be
adjusted only when the Dolby Pro Logic II
mode is set to either "MUSIC" or "MATRIX",
"SP-SETTING" is set to "CTR+SW" and
"CENTER-SP" is set to "ON".
• The factory default setting for SW VOLUME is
"0" and for CTR VOLUME is "0".
1. Press the [SOUND] button.
DXZ948RMP
15