Transport And Storage; Start-Up - Trotec INT PJSS 10-230V Traduction De La Notice Originale

Transport and storage

Note
If you store or transport the device
improperly, the device may be damaged.
Note the information regarding transport
and storage of the device.
Transport
Before transporting the device, observe the
following:
• Switch off the device.
• Hold onto the mains plug while pulling the
power cable out of the mains socket.
• Allow the device to cool down.
• Remove the tool from the tool holder.
• If attached, disconnect the dust extraction
system from the device.
Storage
Before storing the device, observe the following:
• Switch off the device.
• Hold onto the mains plug while pulling the
power cable out of the mains socket.
• Allow the device to cool down.
• Remove the tool from the tool holder.
• If attached, disconnect the dust extraction
system from the device.
• Clean the device as described in the
Maintenance chapter.
When the device is not being used, observe the
following storage conditions:
• Dry and protected from frost and heat
• Ambient temperature below 45 °C
• protected from dust and direct sunlight
EN

Start-up

Unpacking the device
•
•
•
Changing the saw blade
As standard, the device is supplied with 3 saw
blades for cutting in wood and one saw blade for
cutting in light metals.
850W pendulum action jigsaw PJSS 10-230V
Take the device and the accessories out of
the packaging.
Warning of electrical voltage
Electric shock from insufficient
insulation.
Check the device for damages and
proper functioning before each use.
If you notice damages, no longer use the
device.
Do not use the device when the device
or your hands are damp or wet!
Check the contents for completeness and
look for damages.
Warning
Risk of suffocation!
Do not leave the packaging lying around.
Children may use it as a dangerous toy.
Dispose of the packaging material according
to the national regulations.
Warning of electrical voltage
Before any work on the device, remove
the mains plug from the mains socket!
Do not touch the mains plug with wet or
damp hands.
Hold onto the mains plug while pulling
the power cable out of the mains socket.
Wear protective gloves
Wear appropriate protective gloves when
inserting or exchanging tools.
33