Safety - Trotec INT PJSS 10-230V Traduction De La Notice Originale

Wear protective clothing
Information marked with this symbol
indicates that you should wear protective
clothing.
Wear protective gloves
Information marked with this symbol
indicates that you should wear protective
gloves.
You can download the current version of the
instructions and the EU declaration of conformity via
the following link:
PJSS 10-230V
https://hub.trotec.com/?id=39835

Safety

General Power Tool Safety Warnings
Warning
Read all safety warnings,
instructions, illustrations and
specifications provided with this
power tool.
Failure to follow all instructions listed
below may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for
future reference.
The term power tool in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
General Power Tool Safety Warnings –
Work area safety
• Keep work area clean and well lit. Clutter
or dark areas invite accidents.
EN
•
•
•
•
•
•
•
•
850W pendulum action jigsaw PJSS 10-230V
Do not operate power tools in explosive
atmosphere, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
General Power Tool Safety Warnings –
Electrical safety
Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of
electric shock.
Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if your
body is earthed or grounded.
Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric
shock.
When operating a power tool outdoors,
use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply. Use
of an RCD reduces the risk of electric shock.
25