Manual Adjustment; Electronic Adjustment - Electrolux ESL 6380RO Notice D'utilisation

10 www.electrolux.com
1) Factory position.
2) Do not use salt at this level.
You must adjust the water soften-
er manually and electronically.

Manual adjustment

Electronic adjustment

1. Press the on/off button to activate the
appliance.
2. Do the Reset function.
3. Press and hold, at the same time,
Program and MyFavourite until the
indicators of Delay, Program and My-
Favourite start to flash.
4. Press Delay.
• The indicators of Program and My-
Favourite go off.
• The indicator of Delay continues to
flash.
6.2 Filling the salt container
Turn the water hardness dial to the posi-
tion 1 or 2.
• The acoustic signals operate. E.g.
five intermittent acoustic signals =
level 5.
• The display shows the setting of the
water softener. E.g.
5. Press Delay again and again to
change the setting.
6. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
1.
Turn the cap counterclockwise and
open the salt container.
2. Put 1 litre of water in the salt contain-
er (only for the first time).
3. Fill the salt container with dishwasher
salt.
4. Remove the salt around the opening
of the salt container.
5. Turn the cap clockwise to close the
salt container.
CAUTION!
Water and salt can come out from
the salt container when you fill it.
Risk of corrosion. To prevent it,
after you fill the salt container,
start a programme.
= level 5.