Switching Off; Temperature Regulation - Electrolux EUF2742AOW Manuel D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

It is possible to change predefined sound
of buttons to a loudly one by pressing
together Mode and temperature colder
Display
A) Alarm indicator
B) Freezer EcoMode function
C) FastFreeze function
After selection of Mode or the
temperature button the
animations
After selection of the
temperature the animation
flashes for a few minutes.
4.2 Switching on
Connect the mains plug to the power
socket
1. Press the ON/OFF if the display is off.
The temperature indicators show the set
default temperature.
2. The alarm buzzer may sound after a
few seconds.
To reset the alarm refer to "High
temperature alarm".
If "DEMO" appears on the display, the
appliance is in demonstration mode.
Refer to "Troubleshooting...".
To select a different set
temperature refer to

"Temperature regulation".

4.3 Switching off

Press ON/OFF for 3 seconds.
The display switches off.
To disconnect the appliance from the
power, disconnect the mains plug from
the power socket.
starts.
button for some seconds. Change is
reversible.
A
B C D
E
D) Freezer temperature indicator
E) DrinksChill function
4.4 Temperature regulation
The set temperature of the freezer may be
adjusted by pressing the temperature
button.
Set default temperature: -18°C for the
freezer.
The temperature indicator shows the set
temperature.
The set temperature will be reached within
24 hours.
After a power failure the set
temperature remains stored.
4.5 DrinksChill mode
The DrinksChill mode is to be used to set
an acoustic alarm at the preferred time,
useful for example when a recipe requires
to cool down a mixture for a certain period
of time, or when a reminder is needed in
order not to forget the bottles placed in
the freezer for fast cooling.
1. To switch on the function press
DrinksChill .
The DrinksChill indicator appears.
The timer shows the set value (30
minutes).
2. Press the temperature colder button
and temperature warmer button to
change the timer set value from 1 to
90 minutes.
The timer indicator is shown (min).
ENGLISH
7

Publicité

Table des Matières
loading

Table des Matières