Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GB
DANGER: When drilling "over"
head, always use a water collecting
ring and a industrial wet-type vacu-
um cleaner!
Mounting the water collecting
ring
Loosen the fixation screw 33 on the water
•
collecting ring 34.
Push the water collecting ring 34 onto the
•
drill stand and press it firmly against the
material to be drilled.
Tighten fixation screw 33.
•
•
Connect a industrial wet-type vacuum
cleaner.
•
When using the water collecting ring,
attach a protective cover 32 onto it and
drill through. Remove te drilled part of the
cover 32 from the core bit.
TRANSPORT AND STORAGE
CAUTION: Danger of injury and
damage! Pay attention to the weight
of the appliance when transporting
it.
•
Clean the machine and remove the drilling
dirt.
•
Transport the machine and core bit sepa-
rately.
•
Blow out remaining water from hose and
machine when it freezes.
Problem
The motor doesn't
work.
RODIA
®
Possible cause
Defective motor.
Defective cable of plug.
Defective switch.
130/164/300
•
This appliance may only be stored inside
a building.
MAINTENANCE AND
CLEANING
Clean the machine with water and a brush
after use and lubricate the moveable parts as
well as the rack with a silikon spray.
Always keep the machine and cooling air
vents free and clean. It must always be kept in
a dry, frost-free place.
Clean the filter of the vacuum pump
The condition of the filter must be checked at
regular intervals.
•
Loosen the four screws with hexagonal
recess on the bottom of the frame 46.
Unscrew filter cover 39.
•
•
If necessary, renew filter parts.
Screw on filter cap 39 again. The arrows
•
on the cap must point in the direction of
flow of the sucked in air.
Mount the pump on the frame 46 again.
•
TROUBLESHOOTING
For malfunctions that are not specified in this
chapter, when in doubt or when explicitly
indicated, seek assistance from an authorized
service facility.
Possible solution
Contact customer service. Never
repair the motor yourself.
Danger!
PRCD protective switch is not
switched on, test!
Have inspected by a electrical spe-
cialist and replaced if necessary.
Contact customer service.
26
Publicité
Table des Matières
