Disassembly And Disposal - SIKA P 700.3 Notice D'utilisation

Hand test pump
Before storage, we recommend that you consider the following points:
 Clean the hand pump and the accessories.
 Turn the fine adjustment valve in a clockwise direction until
the thread is no longer visible ( illustration).
 Open the pressure relief valve.
Important storage information!
• Do not store under pressure:
Only store the hand pump with the pressure relief valve open. This ensures that no pres-
sure can be built up by unintentional pumping movements.
• Openings facing up:
Ensure that the caps of the supply container and the refill bottle are properly closed and
facing up when these items are stored.
8

Disassembly and disposal

CAUTION! Risk of injury!
Never remove the device from a measurement set up in operation.
 Make sure that the measurement set up is shut down professionally.
Before disassembly:
Prior to disassembly, ensure that
 the measurement set up is switched off and is in a safe and de-energised state.
 the measurement set up is depressurised and has cooled down.
Disassembly:
 Remove the reference gauge and the test item.
 Drain the hand pump if there is still medium in the reservoir.
Disposal hand pump:
IMPORTANT! No household waste!
The hand pump consists of various different materials. It should not be disposed of with
household waste.
 Take the hand pump to your local recycling plant
or
 send the hand pump back to your supplier or to SIKA.
Disposal hydraulic oil:
IMPORTANT!
Dispose of the hydraulic oil in accordance with the Technical Safety Data Sheet.
Technical changes reserved
Disassembly and disposal
- 37 -