Device Description; Delivery, Unpacking And Accessories - SIKA P 700.3 Notice D'utilisation

Device description

1 Device description
The hand pump creates positive pressure for the inspection,
adjustment or calibration of pressure-measuring devices
(pressure gauges) of all kinds.
The hand pump can be used for test items directly on loca-
tion, thanks to its light weight and compact design.
The hand pump and the pressure hose have MINIMESS
connections.
When the hand pump is used, it needs to be connected to a
reference gauge and to the test item.
Type plate and label:
You find the type plate on the lower pump body. It
includes the essential technical data and instruc-
tions.
An additional indication of the maximum allowable
hand pump pressure is located on the upper pump
body (Example  Fig.).

1.1 Delivery, unpacking and accessories

All units have been carefully checked for their operational reliability before shipment.
 Immediately after receipt, please check the outer packaging for damages or any signs of
improper handling.
 Report any possible damages to the forwarder and your responsible sales representative.
In such a case, state a description of the defect, the type and the serial number of the de-
vice.
Report any in-transit damage immediately. Damage reported at a later date shall not be
recognized.
Unpacking:
 Carefully unpack the unit to prevent any damage.
 Check the completeness of the delivery based on the delivery note.
Scope of delivery:
 1x Hand pump according to the order data.
 1x Pressure hose.
 1x Operation manual.
 Packaging (if applicable).
 Accessories as ordered (if applicable).
- 24 -
®
© SIKA • Ba_P700.3 • 08/2016
Hand test pump