ii. for Seat with Base
1. The Joie child restraint with base are 'Semi-universal' child
restraint. They are approved to European Regulation No. 44,
04 series of amendments, for general use in vehicles and
they will fit most, but not all, car seats. Please see the
section 'Vehicle Fitting Information'.
2. Read all the instructions in this manual before using the
product. If you have any further questions, consult the
distributor directly.
3. If in doubt, please consult the child restraint manufacturer or
the retailer.
Product
Infant Child Restraint
Suitable for Child weighing under 13kg
Mass Group Group 0 +
Materials
Plastics, metal, fabrics
Patent No.
Patents pending
17
Parts List
Fig. 1.1
Seat Pad
Fig. 1.2
Side Guide
Fig. 1.3
Insert A
Fig. 1.4
Harness Adjustment
Button
Fig. 1.5
Adjustment Webbing
Fig. 1.6
Crotch Pad
Fig. 1.7
Safety Buckle
Fig. 1.8
Shoulder Harness
Fig. 1.9
Shoulder Pad
Fig. 1.10
Canopy
Fig. 1.11
Insert A
The insert is different for different model, one model has only
one insert. Make sure there are no missing parts, please
contact the distributor if anything is missing.
Concerns on Installation
!
DO NOT install this infant child restraint on vehicle seats with
lap belt.
(Fig. 2)
!
This infant child restraint is only suitable for vehicle seats with
3-Point Retractor Safety Belts.
!
DO NOT install this infant child restraint on vehicle seats that
face sideward or rearward with respect to the moving direction
of the vehicle.
(Fig. 4.1)
!
DO NOT install this infant child restraint on the front vehicle
seat with airbag in case injuries might happen to the child
when there is an accident.
!
This infant child restraint must be installed in the rearward
facing mode.
(Fig. 4.3)
!
DO NOT install this infant child restraint on unstable vehicle
seats during installation.
!
To know more detailed installation information for seat with
base, please refer to the section 'Vehicle Fitting Information'.
Fig. 1.12
Insert B
Fig. 1.13
Handle
Fig. 1.14
Handle Button
Fig. 1.15
Rear Guide
Fig. 1.16
Release Button A
Fig. 1.17
Lock-off
Fig. 1.18
Shell Indicator
Fig. 1.19
Leg Load Indicator
Fig. 1.20
Leg Load
Adjustment Button
Fig. 1.21
Release Button B
(Fig. 3)
(Fig. 4.2)
18