User manual
3.4 Scene Programming (Steps)
3.4.1 INSERT A SCENE
Action :
1) Press and hold the PROGRAM button to enter programming mode.
2) Press the desired CHASE button.
3) Press the TAP SYNC DISPLAY to switch the LED display to steps view.
4) Use the BANK UP/DOWN buttons to navigate steps and locate the insert point of the new scene. The
display will read the step number.
5) Press ADD button to prepare the insert.
6) Use the BANK UP/DOWN button to locate the SCENE.
7) Press the SCENE button that corresponds to the scene to be inserted.
8) Press ADD button to insert the scene. All LEDs will blink
3.4.2 COPY A SCENE
Action :
1) Press and hold the PROGRAM button to enter programming mode.
2) Select the BANK that contains the scene to be copied using the BANK UP/DOWN buttons.
3) Press the SCENE button that corresponds to the scene to be copied.
4) Press ADD button to copy the scene.
5) Select the destination BANK that contains the scene memory to record onto using the BANK UP/DOWN
buttons.
6) Press the desired SCENE button to complete copy.
All LEDs will blink
3.4.3 DELETE A SCENE
Action :
1)Press and hold the PROGRAM button to enter programming mode.
2) Select the BANK that contains the scene to be deleted by using the BANK UP/DOWN buttons.
3) Press and hold the AUTO DEL button then clic the SCENE button that corresponds to the scene you want
to delete. All LEDs will blink.
3.4.4 DELETE ALL SCENES
CAUTION! This process is irreversible All scenes with data will be set to 0
Action :
1) Press and hold the PROGRAM button and the BANK DOWN button while turning off power to the
controller.
2) Release buttons then turn the controller back on.
C 1216
27