Testing Of The Appliance; Adjustments; Replacing Parts; Decommissioning The Appliance - Angelo Po 0G0FR3ED Manuel D'utilisation Et D'installation

TESTING OF THE APPLIANCE

Important
Before it is put into service, the system
must be tested to check the operating con-
ditions of every single component and iden-
tify any malfunctions. In this stage, it is
important to check that all health and safety
requirements have been complied with in
full.
To test the system, make the following checks:
The appliance's main functions do not require any
special adjustments by specialist staff except the
settings made during use by the user.
The appliance does not require the replace-
ment of operating components by specialist staff ex-
cept the replacement of standard parts which can
be carried out by the user.

DECOMMISSIONING THE APPLIANCE

IT
Important
This operation must be carried out by skilled
GB
operatives in compliance with the legal re-
quirements with regard to safety at work.
DE
Never dump non-biodegradable materials,
lubricating oils and non-metallic compo-
FR nents (rubber, PVC, resins, etc.) in the envi-
ronment. Dispose of them in accordance
with the relevant legal requirements.
ES
English
After testing, if necessary instruct the user in all the
skills necessary for putting the appliance into oper-
ation in conditions of safety, in accordance with le-
gal requirements.

ADJUSTMENTS

REPLACING PARTS

- 16 -
1 - check that the mains voltage is the same as that
of the appliance;
2 - operate the appliance's circuit-breaker to check
the electrical connection;
3 - check that the safety device is operating cor-
rectly.
8
9