TECHNICAL DATA
See tables and "Connection chart" at the back of the
manual.
SAFETY DEVICES
Although the appliance is complete with all safety
devices, during installation and connection addition-
al devices must be added if necessary to comply
with the relevant legal requirements.
A)Safety thermostat; cuts off the electricity supply
in case of overheating.
Caution - warning
Make a daily check that the safety devices are
properly installed and in good working order.
SAFETY AND INFORMATION SIGNS
The illustration shows the position of the signs
provided.
A)Nameplate with manufacturer and appli-
ance data
B)General hazard: read the manual carefully before
carrying out any procedure.
C)General hazard: when washing the appliance do not
IT
point pressurised water jets at internal parts.
D)General hazard: all relevant regulations must be
GB
complied with. "Install in compliance with the relevant
regulations and use in well ventilated premises only".
E)General hazard: all relevant regulations must be
DE
complied with. "No liability is accepted in case of fail-
ure to comply with the installation and commissioning
FR
instructions".
F) Burn hazard: watch out for hot surfaces.
ES
G)CE marking: indicates that the appliance is compli-
ant with the relevant norms.
STANDARD ACCESSORIES
Comes complete with the following:
A)Well lid.
B)Basket.
English
A
H
H)WEEE symbol: indicates that the appliance is sub-
ject to specific waste disposal regulations.
A
- 4 -
A
A
E
D
G
C
IDM-39604001600.tif
B
IDM-39604000300.tif
F
B