Prepare The Connections - Ingeteam NEO Pro Manuel D'installation Et Usage

Installation
1.2 m

3.1.5. Prepare the connections

Following the template's indications, carry out the following steps:
1. Place the tube for the power supply wiring at the indicated height.
2. Cut and strip the cables to the recommended length.
3. Fit the ferrules.
CAUTION
Always use a suitable tool (crimper) to avoid bad connections that can cause overheating in the connection
terminals.
ABV2012IQM01_ - Installation and Operation Manual
Ground
Ingeteam
Connector height
EN
ES
FR
IT
11