Technical Specifications; Chargers - Ingeteam NEO Pro Manuel D'installation Et Usage

Ingeteam

4. Technical specifications

4.1. Chargers

Functional
Standard and charging mode
User interface
Status indication
Consumption measurement
Access control
Static power control
Dynamic power control
Charging scheduling
No. of EVs that can be charged simultaneously
Electrical
Frequency
Maximum current (per phase)
Power supply
Voltage
Maximum output power
No. of connectors
Connector type
Safety
Power cut
Protection against electric shock
Relay fault detection in case of welded contacts
Detection of ground connection presence
Detection of correct supply connection
Direct current leak detection
Communications
Bluetooth
Wi-Fi
Ethernet
Modem
Mechanical
Material
Anchor type
Height (mm)
Width (mm)
Depth (mm)
Weight (including 3 m/5 m/7 m charging cable)
IP rating
IK rating
Connector support (on unit with integrated cable)
Cable length (on unit with integrated cable)
Power terminal block
Maximum power cable gage
Color
Environmental
Suitable for outdoor use
Operating temperature
Storage temperature
24
NEO Pro (single-phase)
Individually for each charger, and for a group of interconnected chargers
Individual charger, with Ingeteam CURVE device. And
group of interconnected chargers, with CURVEx3.
Single-phase (P+N+E)
AC 230 V
7.4 kW
Socket Type 2
Integrated charging cable Type 1
Integrated charging cable Type 2
Single phase
Flame-retardant PC/ASA (V0). Suitable for outdoor use
Ground with the STAND accessory
3.15 kg/3.75 kg/4.35 kg
Accessible from the exterior (no need to open the unit during installation)
NEO Pro (three-phase)
IEC 61851-1 Ed 3.0 Mode 3
Ingeteam NEO app
Multicolor LED
Direct metering with shunt
Free
Proximity
Manual
Individual charger or group of interconnected
chargers, with CURVEx3
Yes
1
50-60 Hz
32 A
Three-phase (3P+N+E)
AC 400 V
1
Socket Type 2
Integrated charging cable Type 2
Latching relay 80 A
Class II
Yes
Yes
Three phase
6 mA
BLE 4.2
Yes
2 x RJ45
LTE (optional)
Wall
365
220
105
3.70 kg/4.35 kg/4.95 kg
IP54
IK10
Integrated in the unit
3 meters
5 meters
7 meters
10 mm
2
White
Red
Yes
-25 to 40°C
-25 to 60 °C
ABV2012IQM01_ - Installation and Operation Manual
Technical specifications
22 kW