EIBENSTOCK EFB 68 Notice Originale page 15

Safety Instructions
Safe work with the machine is only possible if you read
this operating instruction and follow the instructions
contained
instructions of the leaflet supplied with the tool must be
observed. Prior to the first use, the user should absolve a
practical training. Save all warnings and instructions for
future reference.
If the mains cable gets damaged or cut during the use, do
not touch it, but instantly pull the plug out of the socket.
Never use the tool with damaged mains cable.
The tool must neither be wet nor used in humid
environment.
Do not use the tool in an environment with danger of explosion.

Do not use the tool standing on a ladder.

Do not drill into asbestos-containing materials.

Do not carry the tool at its cable, and always check the tool, cable

and plug before use. Have damages only repaired by specialists.
Insert the plug into the socket only when the tool switch is off.
Modifications of the tool are prohibited.

Unplug the tool and make sure that the switch is off if the tool is not

under supervision, e.g. during preparation and take-down works, at
power failures, for insertion or mounting accessories.
Unplug the tool if is stops for any reason. So you avoid sudden

starts in unattended condition.
Do not use the tool it its shell, switch, cable or plug are damaged.

Always lead the mains and extension cables as well as the

dedusting hose from the tool to the back.
Electrical tools have to be inspected visually by a specialist in

regular intervals.
After an interruption in your work, only switch on the tile drill after

you have satisfied yourself that the drill bit can rotate freely.
Keep the handles dry, clean, and free of oil and grease.

Do not touch rotating parts.

Persons under 16 years are not allowed to use the tool.

During use, the user and other persons standing nearby have to

wear suitable goggles, ear protectors, protective cloves and boots.
strictly. Additionally,
14
the general safety