Manual Setting - Sony BDV-L600 Mode D'emploi

Blu-ray disc/dvd
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

When connecting to the LAN
with a LAN cable
Follow the Steps below for connecting to a LAN
(Local Area Network).
Auto setting
1
Press X/x to select [Wired Setup] on
the [Internet Settings] display, then
press
2
Press X/x to select [Auto], then press
.
The system performs the network setting
automatically, and internet settings appear
on the TV screen.
3
Press c.
4
Press X/x to select [Save & Connect],
then press
The system starts checking the network
connection.
5
Check that the message [Internet
Settings is now complete.] appears,
then press
The setup is finished. If the message does
not appear, follow the on-screen messages.

Manual setting

1
Press X/x to select [Wired Setup] on
the [Internet Settings] display, then
press
2
Press X/x to select [Custom], then
press
3
Press X/x to select the network setting
type, then press
• [Auto]: The system sets the IP address
automatically, and the [DNS Settings]
display appears.
When you select [Auto] and press
system sets the DNS setting
automatically.
When you select [Specify IP address] and
press
manually.
Press C/X/x/c and the number buttons to
set the following items, then press
54
US
.
.
.
.
.
.
, enter the DNS settings
– [Primary DNS]
– [Secondary DNS]
• [Specify IP address]: Enter the network
settings manually according to your
network environment.
Press C/X/x/c and the number buttons to
set the following items, then press
– [IP Address]
– [Subnet Mask]
– [Default Gateway]
– [Primary DNS]
– [Secondary DNS]
4
Press X/x to select the proxy server
setting, then press
• [No]: A proxy server is not used.
• [Yes]: Enter the proxy server setting.
Press C/X/x/c and the number buttons,
then press
The value of the internet settings appears on
the TV screen.
5
Press c.
6
Press X/x to select [Save & Connect],
then press
The system starts checking the network
connection.
7
Check that the message [Internet
Settings is now complete.] appears,
then press
The setup is finished. If the message does
not appear, follow the on-screen messages.
, the
.
.
.
.
.
.

Publicité

Chapitres

Table des Matières
loading

Table des Matières