Sony BDV-L600 Mode D'emploi page 26

4
Attach the panel cover to the rear of the main unit.
Put the left edge of the lower part of the panel cover on (C), align the bottom projection of the
panel cover with (D), and then slide it inward until it clicks into place.
FM wire antenna (aerial)
• Be sure to fully extend the FM wire antenna (aerial).
• After attaching the panel cover, keep the FM wire antenna (aerial) as horizontal as possible.
• If a USB device (such as a USB memory) that has a long, thin body to the side panel, use the
on the left side of the main unit.
5
Attach the stand cover to the rear of the main unit.
Align both edges of lower part of the stand cover with the guides on the stand (E), and then slide
the stand cover down gently.
To remove the stand cover
Place the main unit on its face.
Press the catches on the stand down and slide the stand cover in the direction of the arrow in the
illustration below.
26
US
(USB) port