shark ION F80 Guide D'utilisation page 5

VERSATILE CLEANING
FLOOR
Press the Power button, then choose your Surface
setting and your Suction setting. Place your foot
gently on the floor nozzle and tilt the handle back.
For low furniture, take advantage of the MultiFlex™
wand. See next page.
NOTE: Brushrolls will only engage when the handle is
tilted back.
s h a r kc l e a n . c o m
ABOVE FLOOR
Wand
Release
Press the Wand Release button to disconnect
the handheld vacuum. Attach accessory, then press
the power button.
Stand the vacuum upright. Step on the Floor Nozzle
Release pedal and pull the wand up to disconnect it
from the floor nozzle. Attach accessory, then press
the power button.
NOTE: All accessories are compatible with both the
handvac and the wand.
USING THE MULTIFLEX
MULTIFLEX REACH
Press the MultiFLEX Wand button to position the
wand to a lower angle for ease of use under low
furniture.
WAND
TM
MULTIFLEX STORAGE
(Click)
Press the MultiFLEX Wand button and hold it
down while folding the handheld vacuum forward.
Use the handle to carry the vacuum.
(Click)
To take the vacuum out of storage mode,
press the MultiFlex Wand button while lifting
TM
up the handheld vacuum.
s h a r kc l e a n . c o m