shark ION F80 Guide D'utilisation page 4

Sans cordon
Masquer les pouces Voir aussi pour ION F80:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CHARGING THE ION POWER PACK BATTERY
USING THE ION POWER PACK CHARGER
USING THE ION POWER PACK CHARGING DOCK
Connect ION Power Pack Battery Charger to the
Charging Dock by inserting the charger plug into
the port. Turn plug clockwise to lock.
NOTE: Not all units come with the charging dock. See enclosed Quick Start Guide for your configuration.
s h a r kc l e a n . c o m
OR
IN THE VACUUM
OUT OF THE VACUUM
1
Place battery onto dock, then connect charger to
wall outlet.
SMART RESPONSE™ TECHNOLOGY
Surface Settings
CARPET
For carpets.
FLOOR
For bare floors and
small area rugs.
2
PLEASE NOTE: Use of ION BOOST Mode will drain your ION Power Pack faster.
NOTE: Select Carpet setting for stuck-on dirt and debris.
NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please select CARPET and ION BOOST settings.
Power Button
Suction Settings
For everyday cleaning.
1-minute boost of increased
suction for high-traffic
areas and heavy messes.
To use ION BOOST
than 1-minute, you
ION
1-minute period ends.
ION BOOST button.
for manual control
of the mode for as
long as you need it.
s h a r kc l e a n . c o m
ION POWER
ION BOOST
Press for a timed
mode for longer
can re-press the
ION BOOST
button when the
You can end
ION BOOST
mode prior to
the 1-minute
by pressing the
Press and
hold ION BOOST

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Multiflex if280 sérieMultiflex uf280 série

Table des Matières