Description - Hilti SF 10W-A18 Mode D'emploi

pipes are present. External metal parts of the power tool may become live,
for example, when an electric cable is damaged accidentally. This presents
a serious risk of electric shock.

3 Description

3.1 Use of the product as directed
The SF 10W-A18 is a hand-held, cordless drill / driver for driving and
removing screws and for drilling in steel, wood and plastic.
Do not use the battery as a power source for other unspecified appliances.
To avoid the risk of injury, use only genuine Hilti accessories and insert tools.
The power tool is designed for professional use and may be operated,
serviced and maintained only by trained, authorized personnel.
personnel must be informed of any special hazards that may be encountered.
The power tool and its ancillary equipment may present hazards when used
incorrectly by untrained personnel or when used not as directed.
3.2 Standard equipment includes:
1 Power tool
1 Side handle
1 Operating instructions
NOTE
Accessories can be found at your Hilti Center or online at www.hilti.com.
3.3 Charge state and overheating indicator display on the Li-ion bat-
tery
When the lithium-ion battery is in use, the charge status can be indicated
by gently pressing one of the battery release buttons (press until resistance
is felt - do not release the battery). The display on the rear of the battery
provides the following information:
LEDs light constantly
LED 1, 2, 3, 4
LED 1, 2, 3
LED 1, 2
LED 1
-
Printed: 15.04.2015 | Doc-Nr: PUB / 5161673 / 000 / 04
LEDs blink
-
-
-
-
LED 1
Charge status C
C ≧ 75 %
50 % ≦ C < 75 %
25 % ≦ C < 50 %
10 % ≦ C < 25 %
C < 10 %
en
This
9