Table des Matières
Publicité
● Wood is a natural product that can swell, shrink or warp, despite good storage.
For this reason, some force may be necessary during the installation.
● All screw fittings must be pre-drilled.
Tools required
● Hammer with a wooden head or a mallet
● Cordless screwdriver with bits for cross-head screws and Torx
● Roller tape measure
● Drill bits with a diameter of 3 mm, 10 mm, 20 - 30 mm (for sauna heater power cable)
● Spirit level
● 1.5 mm hexagonal socket wrench
● Utility knife
● Ladder
● Backsaw
This symbol indicates tips and useful information
Pre-drill
Cut to real measurement with backsaw
Check the right angle:
80 cm
03
Publicité
Table des Matières
