Change Of Hinge Side - Nordcap Display cooler M95 Mode D'emploi

GB

Change of hinge side

The door can be changed from right-hinged to left-hinged and vice versa as follows:
1) Screw 2) Bottom hinge, right 3) Door pin 4) Top hinge, right 5) Door
6) Cabinet 7) Top hinge, left
● Ensure that the cabinet is not connected
to the mains and place the cabinet on the
back
● Dismount the screws (1) SUPPORT THE
DOOR! See fig. 5.1
● Dismount the door by pulling it forwards
and free from the top hinge. See fig. 5.2
● Dismount the right top hinge and save it
for later use. See fig. 5.3
● Mount the left top and bottom hinge en-
closed (7 + 8). See fig. 5.4
fig. 5.1
fig. 5.3
8) Bottom hinge, left
● Remount the door pin previously dis-
● Mount the door in the top hinge (7)
● Lift up the cabinet again and wait 1 hour
8
mounted (3) in the bottom hinge
towards the door pin (3), tighten the door
pin (1)
before connecting it to the mains to avoid
oil in the cooling system
fig. 5.2
fig. 5.4