Nordcap Display cooler M95 Mode D'emploi page 6

GB
Installation
The surface on which the appliance is to be
placed must be level. Do not use a frame
or similar. It is important that the appliance
be absolutely level. It can be levelled by
screwing the adjustable feet at the front of
the appliance up or down (fig. 2).
Use a spirit level to check that the appliance
is absolutely level sideways.
The appliances can be installed as built-in
units in kitchen elements or be placed free-
standing (fig. 3).
At built-in condition ensure sufficient airflow fig. 2
fig. 2
through the kitchen base in front of the ap-
pliance. Individual air duct clearance must
be at least 5 mm.
Along with your new cabinet is a replace-
able kick plate which can be fixed with the
two screws. These two screws are located
in the accessories
NOTE: The kick plate should not be
installed if the unit installed behind a
kitchen shelf.
6