Aligning The Appliance; Water Outlet - Schulthess WT 14 MFH W Notice D'installation

Aligning the appliance

Align the appliance with the help of
►
a spirit level. Otherwise, the machine
may wander and cause damage or lose
condensation water.
Notice
The machine must be in a vertical
position with all four feet firmly on the
floor and it must not wobble.
Washer-Dryer tower
In order to save space (installation
space), you can place your dryer on top
of a washing machine (washer-dryer
tower). It is absolutely imperative not
to mount a washing machine on a
dryer, risk of falling.
You can obtain the appropriate parts as
a construction kit from your specialist
dealer or our customer service. The
installation must be carried out by a
specialised electrician.
36 EN
Washer-dryer tower staking kit, white
►
Order No: 510 44
Washer-dryer tower staking kit, grey
►
Order No: 510 56
Warning
Risk of tipping!
It is absolutely imperative not to mount
►
a washing machine on a dryer.

Water outlet

The condensed water collects in the
condensate pan and is pumped into
the drain pipe from there.
The drainage hose is fastened to the
condensate pan on the back of the
dryer and may be directed to the left or
to the right.
Dimensions condensate drain hose:
ø 10 / 15 x 1900 mm
The waste water hose may be con-
►
ducted in the siphon of a sink unit or
another waste pipe.
Important
Check that there is no tension on the
drainage hose.
Strong tension may kink the hose, which
prevents the condensation water from
being pumped out.
Ensure that the pump must not pump
►
higher than 100 cm and that no waste
water can ran back into the condensa-
tion pan.