Installation Area; Aligning The Appliance - Schulthess WT 14 MFH A Notice D'installation

Installation area

In order to ensure the stability of
the appliance during spin drying, the
installation area must be firm and level.
Soft floor coverings, e.g. fitted carpets
or coverings with a foamed material
backing are not suitable as an installa­
tion area.
Do not obstruct the ventilation grille at
the bottom of the front of the appliance.
Keep the area surrounding the dryer
►
free of dust and fluff.
Fixing set
For installation on slippery ground, e.g.
installation base with tile surface, two
self­adhesive receptacles secure the
machine from shifting.
You can purchase the following fixing
sets at your specialist retailer or
through our customer services team:
Steel fixing set – to be drilled
►
Order No: S110
Plastic fixing set – to be glued
►
Order No: 51215
Keep machine dimensions in mind
The minimum distance between the
machine and the wall or possibly an­
other machine is 1 cm.
Important
The machine must be placed with its
back against a wall.

Aligning the appliance

Align the appliance with the help of
►
a spirit level. Otherwise, the machine
may wander and cause damage or lose
condensation water.
Notice
The machine must be in a vertical
position with all four feet firmly on the
floor and it must not wobble.
EN 41