Energy Saving Tips - Waeco CoolMatic CRP-40 Notice D'utilisation

CRP-40.book Seite 32 Donnerstag, 8. Oktober 2009 11:48 11
Using the refrigerator
7.1

Energy saving tips

Choose a well ventilated location which is protected from direct sunlight.
Allow hot food to cool down first before you place it into the device.
Do not open the refrigerator more often than necessary.
Do not leave the door open for longer than necessary.
Defrost your refrigerator as soon as a layer of ice forms.
Avoid unnecessarily low temperature settings.
Clean dust and dirt from the condenser at regular intervals.
7.2 Using the refrigerator
The fridge conserves fresh foodstuffs. The freezer compartment conserves
frozen foodstuffs and freezes fresh foodstuffs.
Caution!
a
Make sure that drinks or foodstuffs in glass containers are not
cooled too severely.
Drinks and liquids expand when they freeze. This can break the
glass containers.
Caution!
a
Food may only be stored in its original packaging or in suitable con-
tainers.
➤ Switch the refrigerator on by turning the knob (fig. 3 1, page 4) to the
right.
Note
I
After switching on, the refrigerator requires approx. 60 s until the
compressor starts up.
Caution!
a
Ensure that the objects placed in the refrigerator are suitable for
cooling to the selected temperature.
Setting the temperature
You can set the temperature to any level using the knob. The built-in thermo-
stat regulates the temperature as follows:
Min. (left limit) = warmest setting
Max. (right limit) = coldest setting
32
CoolMatic CRP-40